Today I will analyze its work environment for you. When polishing the mold
parts, everyone need to prepare work plan and good preparation in advance.
That can better to polish mold parts.
Polishing process of mold parts should be separated in two workplace to
complete, that is, coarse grinding processing site and fine polishing
processing site. And you should pay attention to cleaning the sand on the
surface of workpiece. Generally from using oil stone to 1200 # sandpaper
after the completion of the coarse polishing, polishing workpiece need to
transfer to the clean room to polish, in order to make sure that no dust
particles in the air sticking in the mold surface. Accuracy requirement
above 1 microns (including 1 microns) can be polished in the clean polishing
room. But a more precise polishing require in an absolute clean space,
because dust, Smog, dandruff and saliva foam are likrly to scrap the high
precision polishing surface.
After completing mold parts polishing, the workpiece surface should do
dustproof protection measure. When the polishing process stops, all
abrasives and lubricant should be carefully removed to ensure the workpiece
surface clean. Then the workpiece surface should be sprayed a layer of mold
factory. The work environment of mold parts polishing is very good in our
factory. And our polishing methods are various. So you may rest assured to
purchase our mold parts.
